Click Buy Now for Updated Price. Estimated Price: 1451.76$
The Fluke milliamp process Digital clamp-meter is a manual-ranging meter for measuring DC milliampere (MA) and DC Voltage output signals of 24V loop circuits. It has a clamp that measures DC to 100MA. The clamp has two jaws that can close around an electrical conductor up to 4.5mm (0.177 inches) in diameter to measure current without touching or Interrupting the circuit, and has a 1 M extension cable so it can detach from the meter Body for hard-to-reach applications. A set of Test leads is included for measuring DC to 24MA and DC Voltage to 30V. The meter can source and simulate DC signals up to 20MA, can source DC Voltage signals up to 10V, and is accurate to 0.2 percent with a resolution of 0.01MA. It has an LCD that shows both milliamp readings and percent of 4 to 20MA span, and a backlight for visibility in low light that turns off automatically after two minutes. An LED at the top of the meter Body can be illuminated to aid visibility of wires in Dark enclosures. The meter features a built-in 24V loop power supply for powering a transmitter and measuring its milliampere output signal, and a scaled milliampere output for connecting to a logging device (sold separately) to record measurements. To aid documentation of readings and capture readings in tight spaces, the data hold function keeps the most recent reading on the display after disconnecting from the circuit. The unit operates on four 1.5V AA batteries, and turns off automatically after 15 minutes of non-use to conserve battery life. It has a low-battery indicator that signals when the battery needs to be replaced. The meter is manual-ranging, so the user selects the operating range for the property being measured. It meets IEC (international electro technical commission) Safety standards 61010-1 and 61010-2-032, has CE (European Conformity) marking, and complies with CSA (Canadian standards Association), and Australia N10140. The unit comes with a Soft carrying case.
Is Discontinued By Manufacturer : No
Product Dimensions : 12.6 x 16.05 x 3.05 inches; 2.5 Pounds
Item model number : FLUKE-773
Department : Unisex Adult
National Stock Number : 6625-01-631-6675, 6625-01-409-1017
Batteries : 4 AA batteries required. (included)
Date First Available : July 9, 2009
Manufacturer : Fluke Corporation
ASIN : B002EL4LIU
Country of Origin : China
Domestic Shipping: Currently, item can be shipped only within the U.S. and to APO/FPO addresses. For APO/FPO shipments, please check with the manufacturer regarding warranty and support issues. International Shipping: This item is not eligible for international shipping. Learn More
Digital clamp-meter for 24V loop circuits measures DC to 100mA via clamp and to 24mA in circuit, and DC voltage to 30V
Meter can source and simulate DC signals from 4 to 20mA, can source DC voltage signals up to 10V, and is accurate to 0.2% with a resolution of 0.01mA
Clamp with 4.5mm (0.177 inches) jaw opening measures current without touching or interrupting the circuit, and is for use in hard-to-reach applications
Built-in 24V loop power supply to power a transmitter and measure its milliamp output signal
Meets EN and IEC safety standards 61010-1 and 61010-2-032
Dual backlit display with both mA measurement and percent of 4 to 20 mA span
Measurement spotlight
